TEMPERATURE CONTROLLER ASCON KM3
CONTROLLER AND MINI-PROGRAMMER 48X48 MM:
- Dimensions 48 x 48 mm (1/16 DIN), depth 48 mm + 14 mm (terminal).
- Front degree of protection IP65 with gasket.
- Double LED display:
- Main Display: 4-digit, 3 dynamic colors red, green and amber h 15.5 mm.
- Secondary Display: 4 digits, green h 7 mm.
- 1 input for temperature probes: tc J, K, S, R, T; infrared sensors J and K; RTD Pt 100 and PT1000 2 wires; PTC KTY81-121 (990 Ω @ 25 ° C); NTC 103AT-2 (10K @ 25 ° C), for mV signals 0/12 … 60 mV or standard signals 0/4 … 20 mA, 0/1 … 5 V, 0/2 .. . 10 V.
- Measurement Accuracy: ± 0.5% of span ± 1 digit; tc S ± 1% span ± 1 digit.
- 1 or 2 digital inputs for voltage-free contacts, according to the instrument configuration code (the second digital input is in the alternative to OUT4).
- Power supply: 24 VAC / VDC ± 10%, 100 … 240 VAC / VDC (-15% / + 10%).
- Consumption: 7 VA max.
- Frequency: 50/60 HZ.
- outputs:
- OUT1: Relay SPST-NO 4A / 240 Vac or in tension to drive SSR 13V max @ 1mA, 10.5 min @ 15 mA ± 10% or electrically isolated analogue 0/4 … 20 mA, 0/2 … 10V
- OUT2: Relay SPST-NO 2A / 240 Vac or in tension to drive SSR 13V max @ 1mA, 10.5 min @ 15 mA ± 10%
- OUT3: Relay SPST-NO 2A / 240 Vac or in tension to drive SSR 13V max @ 1mA, 10.5 min @ 15 mA ± 10%
- programmable OUT4: voltage for driving SSR 13V max @ 1mA, 10.5 min @ 15 mA ± 10%, or power to the transmitter or digital input.
- Auxiliary power output: 13V max @ 1mA, 10.5 min @ 15 mA ± 10%
- SERVOMOTOR output.
- 3 alarms configurable as absolute, deviation, band.
- September 4 point selectable.
- Serial Communication: TTL (standard) + RS 485 (optional) Isolated, MODBUS RTU (JBUS).
- Communication speed: 2400 … 38400 baud.
- single and double action PID control with overshoot control, ON / OFF, ON / OFF Neutral Zone, Auto-tuning, self-tuning.
- Programmer up to 8 segments with guaranteed maintenance.
- independent timer with 5 modes of operation.
- EVOgreen function: timed shutdown of the display can be set in the absence of the operator ..
- Wattmeter for the calculation of the instantaneous power and energy consumed.
- Counting hours worked: a cumulative counter can not be deleted and a second resettable counter with alarm.
- Connections: 16 screw terminals 2.5 mm² (AWG22 … AWG14) on fixed terminal block, removable or spring.
